Support Center > Knowledgebase> Article: No Y-Axis movement on the APR-5000-XL?

No Y-Axis movement on the APR-5000-XL?

Article ID: 97255 Email Print
No Y-Axis movement on the APR-5000-XL?


Possible Causes:

1) Bad connection somewher in the machine.

2) Bad joy stick assembly.

3) Loose wiring to Lynx motor controller #3.

4) Bad Lynx motor controller #3.

5) Bad enable button assembly.

6)Bad X-Axis motor assembly.

Possible Solutions (corresponding to the Causes #):

1) Check all connections to motor, joystick, action button board, EMI PCB, control PCB, and motor control (Lynx) box.

2) Replace joystick (APR-JS). Replacement instructions: APR-JS Replacement Instructions.pdf

3) Check wiring  to Lynx box #3 (APR-XLYMC). XL Y-AXIS Motor Box 3 XChecks.pdf

4) Replace Lynx box #3 (APR-XLYMC).

5) Check enable button and connection to action button board.

6) Replace Y-Axis motor (APR-YAM).

If you need instructions on how to replace or check any of these parts, please contact our APR Support Team.

related articles

Article Details
Views: 308 Created on: Aug 31, 2018
Date updated: Sep 04, 2018
Tagged: lynx, motor, joystick

Poor Outstanding