Support Center > Knowledgebase> Category: Camera
Category: Camera
8 Articles
Orange arrow What kind of vision system does the Scorpion Rework System use?

833 views
  The Scorpion Rework System uses a Smartplace Technology Vision System. It uses a dual, full color HD camera with a selectble camera view and diffused LED lighting for shadow-free component alignment....
Orange arrow How often does the Scorpion Rework System need to be calibrated?

787 views
  External Thermocouple Calibration: Every 12 months or as required Heater Calibrations: Every 12 months or as required Optical Calibration: Every 6-12 months or as required...
Orange arrow How do I calibrate my Scorpion Rework System?

507 views
  For optical calibration, each Scorpion comes with an optical calibration kit. For thermal calibration, you can purchase or rent a thermal calibration kit to perform the calibration yourself, or you can schedule an on-site calibration service. All caibration information can be found here....
Orange arrow What is the field of view on the camera for the Scorpion Rework System?

787 views
  The maximum field of view is 60mm x 45mm (2.36" x 1.77") and the minimum viewable component size is 0.51mm x 0.25mm (0.020" x 0.010" )....
Orange arrow What is the field of view on the camera for the Scorpion Rework System?

754 views
  The maximum field of view is 60mm x 45mm (2.36" x 1.77") and the minimum viewable component size is 0.51mm x 0.25mm (0.020" x 0.010" )....
Orange arrow What is the field of view of the camera on the APR-5000-XL?

745 views
  The maximum field of view: standard camera - 35mm x 35mm (1.4" x 1.4") split camera - 55mm x 55mm (2.2" x 2.2")...
Orange arrow Is there no video output on the APR-5000-XL?

646 views
  Possible Causes: 1) Bad video connection. 2) There is a black or blue screen. 3) Corrupt or bad WinTV video drivers. 4) Bad camera. 5) Software vision lockup issue. 6) Camera HOME sensor always on. 7) Bad camera assemly. Possible Solutions (corresponding to the Causes #): 1) Check all came...
Tagged: black, blue, WinTV


Orange arrow Is there no component lighting on the APR-5000-XL camera?

576 views
  Possible Causes: 1) Bad lamp assembly. 2) Bad inverter board. Possible Solutions (corresponding to the Causes #): 1) Replace lamp assembly (APR-CL). Replacement instructions: APR Camera Repair Instructions (lamp, inverter, camera module, fan).pdf (follow through page 2). 2) Replace inverter bo...
Tagged: camera, lamp, inverter



Page: 1 of 1