Knowledge system is not enabled for this account. Redirecting to LiveHelpNow... APR - Support Center - Scorpion Systems
Support Center > Knowledgebase> Category: Scorpion Systems
Category: Scorpion Systems
27 Articles
Orange arrow Can I trade-in my APR-5000-XL for a new Scorpion Rework System?

1274 views
  Yes! There are discounts available when upgrading to a new Scorpion Rework System. Please contact APR Customer Service for more information....
Orange arrow What is the field of view on the camera for the Scorpion Rework System?

1557 views
  The maximum field of view is 60mm x 45mm (2.36" x 1.77") and the minimum viewable component size is 0.51mm x 0.25mm (0.020" x 0.010" )....
Orange arrow How do I update the software on my Scorpion Rework System?

1567 views
  You can download the newest version of software for any of the APR product lines here. Upload the update file to a USB drive, insert the USB into the machine, and boot it up. The update file will be regonized by the machine and will be automatically downloaded. You will be contacted by the APR Serv...
Tagged: update, usb, file


Orange arrow What is the smallest pitch size I can rework on a Scorpion Rework machine?

1419 views
  The smallest commonly reworked pitch on the Scorpion is about 0.4mm, with the rework capability of smaller pitch sizes being possible but much less common....
Orange arrow What are the dimensions of the Scorpion Rework Machine?

1572 views
  The Scorpion Rework System is measured at 18" x 22" x 26" (457mm x 559mm x 660mm) and weighs 140lbs (63.5kg)....
Orange arrow Will I need compressed air to use the Scorpion Rework System?

711 views
  The Scorpion Rework System is a completely self-contained machine. No air supply is needed, just plug it and it is ready to operate!...
Orange arrow What is the field of view on the camera for the Scorpion Rework System?

1504 views
  The maximum field of view is 60mm x 45mm (2.36" x 1.77") and the minimum viewable component size is 0.51mm x 0.25mm (0.020" x 0.010" )....
Orange arrow What makes the APR-1200A-SRS model special?

1395 views
  The 1200A Scorpion model has Automatic Precision Placement with fine motor control of .127mm (.005in) increments in the Z-axis and full 360º rotation with 0.25º increment in θ (theta). This model is also equiped with Force Feedback Control that enables the unit to accurately pick an...
Orange arrow What power input does the Scorpion Rework System use?

697 views
  The Scorpion Rework System uses 208-240VAC, 50/60Hz, 15 Amp, Single Phase....
Orange arrow What is the maximum weight of a component the Scorpion Rework System can lift?

1423 views
  The maximum weight the Scorpion can lift is approximately 1.94oz (55g)....
Orange arrow How do I order nozzles and stencils?

1626 views
  Once you know what size nozzle you need, check our standard nozzle list. Don't see the nozzle you want? We can custom design any size and/or shape nozzle, just fill out the APR Service Request Form to get started. All stencils are custom made to order....
Orange arrow How often does the Scorpion Rework System need to be calibrated?

1707 views
  External Thermocouple Calibration: Every 12 months or as required Heater Calibrations: Every 12 months or as required Optical Calibration: Every 6-12 months or as required...
Orange arrow What type of operating system does the Scorpion Rework System use?

1650 views
  The Scorpion Rework System uses a Linux-based integral computer....
Orange arrow What kind of vision system does the Scorpion Rework System use?

1799 views
  The Scorpion Rework System uses a Smartplace Technology Vision System. It uses a dual, full color HD camera with a selectble camera view and diffused LED lighting for shadow-free component alignment....
Orange arrow What kind of warranty does the Scorpion Rework System have?

945 views
  The Scorpion Rework System is covered by a Limited Warranty....

Page: 1 of 2