Support Center > Knowledgebase> Tagged: binding
Tag: binding
2 Articles
Orange arrow The vacuum tube on the APR-5000-XL is stuck and/or binding when in FREE mode?

392 views
  Possible Causes: 1) Flux build up in vacuum tube bushing and/or collet. 2) No vacuum to the bottom inlet on air cylinder. 3) Bad air cylinder. 4) Vacuum tube is bent. Solutions (corresponding to the Causes #): 1) Remove the vacuum tube and carefilly clean vacuum tube bushings with alcohol or ...
Orange arrow Reflow head is squeaking or binding when moving in the Z-Axis?

479 views
  The Z-Axis leadscrew likely needs lubrication. Lubrication instructions: APR-XL Z-AXIS Lubrication.pdf....

Page: 1 of 1