Support Center > Knowledgebase> Tagged: Component
Tag: Component
6 Articles
Orange arrow Is the Scorpion Rework System lead-free compatible?

1118 views
  Yes, the Scorpion Rework Systems work for both leaded and lead-free solder....
Orange arrow What common types of packages can the Scorpion Rework System rework?

1251 views
  The Scorpion Rework Systems can rework a large variety of component packages. The most common packages are BGA, PBGA, CGA, CTBGA, CVBGA, LLP, LGA, PLCC, QFP, POP, 0603, 0401, 0201....
Orange arrow How do I know what size reflow nozzle to use to rework a component?

1336 views
  The size of the reflow nozzle depends on your board and the surrounding components. You want your nozzle to surround the component you are reworking without overlapping the adjacent components. We recommend a minimum of 1mm clearance from the component. For example, if your component is 21 x 21mm w...
Orange arrow What is the maximum weight of a component the Scorpion Rework System can lift?

920 views
  The maximum weight the Scorpion can lift is approximately 1.94oz (55g)....
Orange arrow What is the field of view on the camera for the Scorpion Rework System?

1098 views
  The maximum field of view is 60mm x 45mm (2.36" x 1.77") and the minimum viewable component size is 0.51mm x 0.25mm (0.020" x 0.010" )....
Orange arrow What is the field of view on the camera for the Scorpion Rework System?

1083 views
  The maximum field of view is 60mm x 45mm (2.36" x 1.77") and the minimum viewable component size is 0.51mm x 0.25mm (0.020" x 0.010" )....

Page: 1 of 1